The pneumatic impact wrench was introduced by Ingersoll Rand in 1934. It is a good long run in the technology world as it can be used in tightening quickly and easily as it produces an adequate speed in tightening and it is made in such a lightweight package which can be handled easily.
The pneumatic impact wrench is hard and reliable tools that are designed to give accelerated, safe, and easy fastening for applications that require controllable bolting solutions. The pneumatic impact wrench tools are rich enough to withstand hard job site conditions, some of the best pneumatic impact wrench tools are suitable for applications with a high rate of fastenings which can be found in any of the mining, power generation, and oil and gas industries.
The best pneumatic effect torque can give more torque than you can envision, that is the reason the driving instrument is amazingly made. The pneumatic impact wrench tool commercial use is mostly in heavy work areas where the equipment itself takes a few hard knocks, so it is recommended you check that the casing is as sturdy as the guts before embarking on getting the pneumatic impact wrench tool. Ensure that your pneumatic impact wrench tools have a half-inch drive because anything less than that is not fit in handling any heavy workload without frequent overhauls.
A pneumatic impact wrench is primarily a tool that gives out high torque output with minimal consumption.Impact wrench tool is widely used in many industries such as automotive repair, heavy equipment repair, product assembly, major construction projects, installation of wire jackets, and all other high torque output required industries.
The pneumatic Impact wrenches are generally divided into two categories, including ordinary pneumatic impact wrenches and pulse pneumatic impact wrenches. The difference between the two is that ordinary impact wrench cannot be set torque while the pulse pneumatic wrench can be set torque.
5 Best Pneumatic Impact Wrench
- AIRCAT 1150 – 1/2-Inch Impact Wrench
- Ingersoll Rand – 1/2 Air Impact Wrench
- NitroCat 1200 – 1/2 Pneumatic Impact Wrench
- Goplus – 1″ pneumatic Impact Wrench Gun
- Chicago Pneumatic – 3/4″ Air Impact Wrench
What Is Pneumatic Impact Wrench?
A pneumatic impact wrench is a socket wrench power tool that is designed to give a high torque output with little exertion from the user, by storing energy in a rotating mass and delivering it to the output shaft. Its most common power source is from compressed air, although electric or hydraulic power can also be used.
The Pneumatic impact wrenches are mostly used in many industries such as the automotive repair, heavy equipment maintenance, product assembly, major constructions project, and other industries in which a high torque output is required.
The Pneumatic impact wrenches are always available in every standard socket wrench drive size, from small 1/4 to 7/2 and they are commonly used for air tool.
Why you need Pneumatic Impact Wrench?
A pneumatic effect torque is an attachment torque control instrument that works by putting away in a substantial pivoting mass and afterward discharging it at the same time in little effect against the yield shaft. It is essential to have in any mechanical workshop or garage because it is used in tightening screws or lug nuts.
It packs a considerable measure of punch in a little frame factor. The pneumatic impact wrench is perfect for fastening bolts and tightening screws. They are more torque, they have less weight and they are always affordable to get.
The Pneumatic impact wrench tool can also be used in manufacturing furniture or in a construction site. It can also be used in any organization where there is a need for a quick power tool with an adequate torque.
The pneumatic impact wrench tool is mostly used for loosening lug nuts from cars and trucks. Pneumatic wrenches can be used all the time since they do not require electric power sources. All you need is a supply of compressed air, which in fact, is not too hard to get. And as these are stereo-typically smaller than electric impact wrenches, it gives you access and opportunity to work in condensed spaces or restricted areas.
The best pneumatic impact wrenches
The list below state the best pneumatic impact wrenches to purchase, their usefulness and what makes them outstanding.
Top 5 Best Qualified Pneumatic Impact Wrenches
1. AIRCAT “Killer Torque” 1/2-Inch Impact Wrench
The AirCat 1150 is one of the top-ranked pneumatic impact wrench tool due to its performance and quiet operation, making it an impressive pneumatic impact wrench.
In case you need the AirCat for working on engines or older vehicles, its 1,295 ft-lbs of loosening torque (and 900 ft-lbs max torque) this gun can generate is amazing. With a smooth hammer speed (1,400 blows/min), it helps to remove bolts rather than breaking them. It is considerably calmer than most other effect torques, producing just around 86db at the greatest weight.
You can even rebuild the AirCat 1150 yourself, which will reduce your costs over time compared to tools which have to go back to the factory.
- Dimensions: 7.5 x 2.8 x 7 inches.
- It has a variable speed capability.
- It operating speed is 9,000 RPM
- It is compatible with either bearing grease or lithium for lubrication.
- It working torque is 200 to 950 feet per pound.
- While it loosening torque is 1,295 feet per pound.
- Aircat is more powerful than any other half impact wench and it is also fast.
- The 15% bigger cylinder and rotor makes an unmatched power that makes the apparatus the best in its class.
- The effect torque likewise wards off flotsam and jetsam from the administrator’s face utilizing the licensed through-the handle debilitate.
- It delivers a low operational sound.
- The fumes additionally work at 86 decibels without trading off on the power.
- The snap ring on the iron block of the AIRCAT 1150 doesn’t get a decent grasp of the socket.
- There is additionally a decent possibility of squashing your finger when you are utilizing the torque to keep down the opposite side of a fastener.
2. Ingersoll Rand Air Impact Wrench
The Ingersoll Rand 1/2 inch Air impact wrench can deliver up to 1,350 foot/pounds of loosening torque (930 foot/pound max torque) while remaining light enough which will help you experience minimal fatigue.
It is a four position power regulator that allows for quick torque adjustments, and its twin-hammer mechanism adds durability. Talking of durability, its hammer case is made out of titanium and its wear plate of steel helps ensure the Ingersoll Rand wrench can handle plenty of abuse. It is also of excellent quality has it has a low weight.
- It is made up of a titanium hammer case, composite lodging, and steel-wear plate that certificate use in the harshest conditions.
- Item weight of 4.6 pounds.
- It is as solid as the Ingersoll Rand 2135TIMAX idea.
- Product measurements of 9 x 10 x 3 inches.
- 8500 RPM turning speed.
- 1200 BPM working velocity.
- The Ingersoll-Rand 2235TIMAX has control enough to make the difficult screws and nuts to be accommodating.
- It has a super solid effect making it more grounded than other conventional effect torques out there.
- The materials used to construct it guarantee that it doesn’t really part from deficiencies yet is fairly durable.
- Its strength likewise accompanies trustworthiness and also easy to use.
- The Ingersoll-Rand 2235TIMAX is somewhat bigger in size than its antecedent.
- It is louder when in use.
3. NITROCAT 1/2-INCH AIR IMPACT WRENCH
It is one of the best pneumatic impact wrenches as it operates on a quiet and high performance. The Nitrocat 1200 is similar to the Aircat 1150, while it posses similar max torque and reverses torque ratings, and it operates at a lower of 950 impacts per minute which makes it violent to use.
- Quiet innovation that is protected.
- Easy tasks flip forward and invert switch.
- Ergonomic structure handle.
- Compatible with 5w-30 engine oil for oil purposes. Heavier oils influence its capacity, particularly in chilly atmospheres.
- Product weight: 1.1 pounds.
- Product measurements: 9.2 x 8.5 x 3 inches.
- The ergonomic handle configuration circulates the heaviness of the device consistently on the client’s hand making it all around adjusted.
- It decreases the odds of unsafe depleted particles to get into the administrator’s eye and in addition to being inhaled into their lungs.
- The NitroCat 1200-K is anything but a universally useful weapon and subsequently, it isn’t that solid.
A pneumatic impact wrench is a hand-held tool which can be used for various home projects and also automotive works. It gives a firm hold of an object and also has greater mechanical advantages. It gives efficiency due to its high torque level. With the pneumatic wrench, it gives the user the opportunity to undertake a wide range of activities.
The pneumatic impact wrench also has a lighter and small size which makes it easy to use. The pneumatic impact wrench is also a durable and dependable tool because it operates on compressed air so you don’t need to worry about power supplies.
4. Goplus 1″ Air Impact Wrench
The GOPLUS 1/2 inch Air Impact Wrench is a new air impact wrench which is durable and powerful. The twin-pound instrument conveys a most extreme torque of 900FT.LBS.
What’s more, the forward/turn around switch makes it simple for you to choose the speed you have to accomplish your errand. You can utilize it to repair your autos, tires etc. Other than the extraordinary capacities, our torque is chic and rich not at all like standard wrenches.
- Brand new and high quality.
- Twin Hammer Mechanism, powerful and efficient.
- Directional smelting manufacture, light and durable.
- Easily adjustable power regulator.
- Ideal for general repair on cars, tires, and heavy equipment.
- Extra accessories included.
- Reduces time on difficult jobs with less effort required
- Versatile, capable of handling multiple job situations with the proper socket attachment
- Easy to use with simple trigger action, forward and reverse
- Self, lubricating, depending on model selected
- Lightweight, less than five (5) pounds depending on model selected
- Ergonomically designed grip for comfort
- Low noise omissions, often less than 86 decibels
- Air impact wrenches do not have adjustable chucks found in cordless drills
- Air impact wrenches do not have clutches that disengages when resistance is met
- Possible damage to repair work, breaking off bolts, from over tightening
5. Chicago Pneumatic Heavy Duty Impact Wrench
When it comes to stubby impact wrenches, it is essential to note that this is one of the best out there. This wrench enables it, owners, to handle some very difficult bolts with ease. It is also of a lower risk in stripping and possesses an excellent degree of control compared to similar models, making this a safer tool when working with already damaged fasteners.
Do not take your eyes of this 3/4-inch pneumatic impact wrench, as it loves nothing more than proving size doesn’t matter. Weighing in at a modest 2.9 pounds, this driver can provide 450 foot/pounds of torque in very restricted areas, due to its tiny 4.4-inch length.
- Smoothest working 3/4″ effect available with unmatched sturdiness.
- One hand push catches forward/turn around power controller. 4 positive power settings in forwarding and extreme power backward.
- Handle debilitate with 360º air channel swivel to avert hose wrinkles.
- New agreeable formed handle grasp Ideal for spring work, truck and bus maintenance, farm machinery and construction equipment
- Brand of Chicago Pneumatic
- Side Grip Handle
- Strong Metal Body
- It’s reversible
- As metal body, it’s little weighty