Looking for a perfect carbon filter for your grow tent can be hard. Certain questions might pop up and finding the right answer can be pretty confusing. Therefore to make things easier for you, we have done plenty of research to bring you an accurate iPower carbon filter review.
Here, you will get to know everything about iPower carbon filters in just simple words. Whether you are a beginner or not, this piece of knowledge will come in handy to you and will help you choose the best carbon filter for your grow tent.
We will be covering all of these for you:
- What is CFM
- The range of sizes it has
- Why do we recommend it?
Before we start, let’s dig into the company for a bit.
iPower is a Canadian brand that specializes in every necessity of indoor gardening starting from the best grow tents, HPS and led grow lights, carbon filters, inline grow tent fans, ducts, etc. They are considered to be a leading manufacturer in the market and surely, they are much updated with the technology as well.
Today, we will solely focus on their carbon filters. You will get to know all the reasons why you should or should not get this for your grow tent.
|iPower 4 Inch Air Carbon Filter||Check Price|
|iPower 6 Inch Carbon filter||Check Price|
|iPower 8 Inch Air Carbon Filter||Check Price|
|iPower 12 x 48 Inch Air Carbon Filter||Check Price|
iPower Carbon Filter Review – Features, Pros and Cons
So without any more wait, let’s get into our iPower Carbon filter.
What features does an iPower air carbon filter have?
- Changeable flange
- Comes with pre-filter
- Effective odor control
- Has the multifunctional application
- Australian R-412 activated carbon
Australian R-412 activated carbon
iPower uses Australian R-412 activated carbon which helps to attract the impurities from the air. The carbon is activated by burning in high temperatures. They turn into granulated carbon which is considered one of the best in the world for attracting the particles.
The R-412 pores have a size of 0.02mm and if you are wondering what difference the size makes, then for your information, the bigger the pores, the better they absorb the odors and in terms of sizes.
And 0.02mm is big enough.
What makes iPower unique is that their carbon filter doesn’t work in one way only. Rather it can do both which is, they can intake fresher particles as well as can take out the impurities from inside the grow tent to the outer area.
The iPower carbon filter can be adjusted with inline fans along with ducts. As a result, when the inline fans will bring in fresh air from the outside to the enclosed area the air will come through the filter as well which will help to remove toxic particles from outside as well and the fresh air will get in.
In the case of exhaust fans, the air from the inside gets released. Here, they go through the carbon filter which will help to remove the impurities and hence the clean air will be released outside.
On top of that, it has the feature of reversible flange and bottom which means that the charcoal cylinder can be flipped and that makes you enjoy more capacity for filtering. Also, it increases the carbon filter’s lifespan.
Effective odor control
This is mainly why one would use the iPower carbon filter. They can take in large particles as well as the most unwanted odors.
The carbon filter will suck in all these unwanted particles from the air and will eliminate those along with the harmful ones. Hence, the growing area will be safe and clean for your plants.
Coming to the pre-filter, it does not come with every carbon filter available in the market so you are lucky that iPower provides you with this. This is what helps to absorb the larger particles which normally a basic filter cannot do.
Moreover, you can wash it anytime you want to and hence it has a greater period of life as well. But as a suggestion, you should clean and wash it once every month because if not done so, due to the excess amount of dust being stuck, the pre filter may not work as well as before.
If you are not sure how to clean it, it is super easy. Just take it out, wash it properly, dry it and place it back again and it is good to go.
Therefore, a pre filter included means the carbon filter works better.
However, according to iPower’s recommendation, one should change the pre-filter every 6 months for optimum results.
What about drawbacks?
Well, iPower didn’t mention anything about the noise therefore there may be noise issues that you or your neighbors would not look forward to.
But as many users have already been using it, it should not be of much of a problem for you.
On top of that, the weight of the carbon filters can be an issue as well. They are considered to be quite heavy compared to the grow area size it fits.
It isn’t that big of a problem right?
What is CFM?
But you cannot just get any carbon filter from their range. To get a perfect carbon filter for your grow tent, there’s something like CFM which you need to know first.
CFM is short for Cubic Feet per Minute and this helps to measure how much cubic feet of airflow there is in your enclosed area within a minute.
This means, the bigger your grow rent, the more CFM requirements the carbon filter will have.
But don’t worry, we will help you figure that out as well.
The right iPower carbon filter for a 4×4 grow tent?
For a grow tent with 4 feet length and 4 feet width, the right iPower carbon filter would be iPower 4 Inch Air Carbon Filter,which has a CFM of 200.
The features we have discussed above apply for this carbon filter as all the carbon filters are designed to be the same but the only difference is their size and weight.
The right iPower carbon filter for a 6×6 grow tent?
If the grow tent has 6 feet in length and 6 feet in height, the CFM requirement is 400. Therefore the perfect fit from the iPower carbon filter range for this size is the iPower 6 Inch Air Carbon Filter.
All the elements of this filter have already been discussed above hence if you have skipped that, please do give it a read.
The right iPower carbon filter for an 8×8 grow tent?
A grow tent that has a length of 8 feet and width of 8 feet, will need the iPower 8 Inch Air Carbon Filter for odor control, which also meets the air flow requirement of 750 CFM.
And for your information, a generalized discussion has been given above about the iPower carbon filters and it applies for all sizes.
The right iPower carbon filter for a 10×10 grow tent?
In case of a 10×10 grow tent or maybe more preferably, a grow area with 10 feet length and 10 feet height, it needs a CFM of 1400 and iPower GLFILT10L 10 Inch Air Carbon Filter is the right one.
And yes, the features and drawbacks apply to this as well so please scroll up and give some time to the passages above to benefit you.
Do we recommend iPower carbon filters?
Before concluding, we just want to say that it is totally your choice whether you want to get the iPower carbon filter for your to grow tent or grow area. But the iPower carbon filters are suggested due to its spectacular features and the amazing way it works along with the benefit of extending its lifespan through just flipping the canister.
And you are also aware of the CFM requirements based on the grow tent size therefore if you take the ones we have chosen, you definitely won’t regret it and it will all be worth your money.
Moreover, to get the best results for your plants, you would want a clean environment and for that, a quality carbon filter is very necessary. Therefore from our point of view, we do recommend the iPower carbon filter.
We have invested a lot of time to bring you the best iPower carbon filter review therefore we hope you are satisfied with our outcome. Hopefully now you will be able to decide whether to get the iPower carbon filter for your grow area or not.
So what are you waiting for? If this helped you decide to get the iPower carbon filter, then click on the links given above and get it right away.
And let’s not forget what iPower says, More Value. More Growing.